I have a Motorola Pink Razr 3Vc PrePay Verizon phone. My Motorola phone tool 4.0 won't let me sent pics from my phone. There's nothing on the phone side, and it won't let me press nothing.:loony: Is there something wrong with my phone or my MPT??? Need help!!!
Verizon disables this feature. You have to hack the phone to get it to work...check this thread out -> http://forums.wirelessadvisor.com/razr-phones/56369-motorola-phone-tools-doesnt-work-razr.html
I'm sorry to bother you, but you seem to know what your talking about. I've down loaded MOTO SOFTWARE UPDATE and P2K SEEM 4V710. Read all the instuction for seeming. I'm lost, it's for the Razr v3m and I have a V3c. I don't know what to put for (there is a "load" box. Next to seem, type 2742. Leave record as 1. Then above that, change bytes to 0000. Then hit load from phone). Its for the V3m, How will it reconize my V3c??
V3M and V3C are the same, dont worry about that. But for p2kseem to read from your phone, you MUST have MSU open and running. Make sure u have done that.
I'm sorry about that, I thought I delete the PM, so I wrote it in here. Didn't mean to cause trouble. I installed the MSU. It gave me the ESN #. I closed the MSU when it gave me that #. Do I start it up again and leave it running in the background and then install P2K??? I have the seem's but which one's do I use??? "041a";"0001";"6A";"0";"Bluetooth Or USB file transfer in MPT and E815 BT Obex";"on";"off" Do I change the first numbers to this "2742";"0001";"6A";"0";"Bluetooth Or USB file transfer in MPT and E815 BT Obex";"on";"off" or use the numbers as shown?? Thanks for your help, I truly appreciate it. K[/COLOR]
When MSU runs and displays your ESN, you need to leave it running while using p2kseem. As for what to enter, if what u are changing says: Seem 2742, Record 1, Bytes 0000, Offset 006a, Bit 0 - Check to ON See my attached pic of how your p2kseem box should look. Tthe red ovals are the only areas you should be working in. Just remember to Save To Phone once u make the necessary changes. And also, you MUST restart your phone for these changes to take effect.
