Data cable help needed !!

--------------------------------------------------------------------------------

I recently statred using a new LG VX 6100 from Verizon. I purchased a Third party Data cable for the VX 6100, and installed the drivers that came with it.

The phone shows up in device manager under "modems" and also LG CDMA USB modem diagnostic serial port drivers (WDM)(Com3) is shown under ports. In the USB contollers section I see LG USB Composite Device.

Using a terminal program I can dial the phone.

When I set up Bitpim I did it for the VX 6100 and have tried both Com3 and Com4 under settings.

When I tell Bitpim to detect the phone I get the message "no phone detected"

What follows is the log for this action

13:05:50.759 coms:[{'available': True, 'driverdate': (2001, 7, 1), 'description': 'Communications Port (COM1)', 'driverprovider': 'Microsoft', 'driverversion': '5.1.2600.0', 'hardwareinstance': 'ACPI\\PNP0501\\1', 'driverdescription': 'Communications Port', 'active': True, 'class': 'serial', 'name': 'COM1'}, {'available': True, 'driverdate': (2001, 7, 1), 'description': 'Communications Port (COM2)', 'driverprovider': 'Microsoft', 'driverversion': '5.1.2600.0', 'hardwareinstance': 'ACPI\\PNP0501\\2', 'driverdescription': 'Communications Port', 'active': True, 'class': 'serial', 'name': 'COM2'}, {'available': True, 'driverdate': (2002, 10, 15), 'description': 'LG CDMA USB Modem Diagnostic Serial Port Drivers (WDM) (COM3)', 'driverprovider': 'LG Electronics Inc.', 'driverversion': '3.35.0.600', 'hardwareinstance': 'USB\\VID_1004&PID_6000&MI_02\\6&15313397&0&2_02', 'driverdescription': 'LG CDMA USB Modem Diagnostic Serial Port Drivers (WDM)', 'active': True, 'class': 'serial', 'name': 'COM3'}, {'available': True, 'driverdate': (2002, 10, 15), 'description': 'LG CDMA USB Modem', 'driverprovider': 'LG Electronics Inc.', 'driverversion': '3.35.0.600', 'hardwareinstance': 'USB\\VID_1004&PID_6000&MI_00\\6&15313397&0&2_00', 'driverdescription': 'LG CDMA USB Modem', 'active': True, 'class': 'modem', 'name': 'COM4'}]
13:05:50.769 Available ports: ['COM1', 'COM2', 'COM3', 'COM4']
13:05:50.769 Available modem ports: ['COM4']
13:05:50.868 Gathering data on port: COM4
13:05:50.868 COM4: Opening port COM4, 115200 baud, timeout 1.000000, hardwareflow 0, softwareflow 0
13:05:50.868 COM4: Open of comm port suceeded
13:05:50.878 Done on port: COM4
13:05:50.878 Checking for model: LG-TM520
13:05:50.878 Checking for model: LG-VX10
13:05:50.878 Checking for model: LG-VX4400
13:05:50.888 Checking for model: LG-VX4500
13:05:50.888 Checking for model: LG-VX4600 (Telus Mobility)
13:05:50.888 Checking for model: LG-VX6000
13:05:50.888 Checking for model: LG-VX6100
13:05:50.888 Checking for model: LG-VX7000
13:05:50.888 Checking for model: LG-VX8000 (Verizon Wireless)
13:05:50.888 Checking for model: MM-7400
13:05:50.888 Checking for model: Other CDMA phone
13:05:50.888 Checking for model: PM-8200
13:05:50.888 Checking for model: RL-4920
13:05:50.888 Checking for model: SCH-A310
13:05:50.888 Likely ports:[]
13:05:50.888 Checking for model: SCH-A650
13:05:50.888 Likely ports:[]
13:05:50.888 Checking for model: SCH-A670
13:05:50.888 Likely ports:[]
13:05:50.888 Checking for model: SCP-4900
13:05:50.888 Checking for model: SCP-5300
13:05:50.898 Checking for model: SCP-5400
13:05:50.898 Checking for model: SCP-5500
13:05:50.898 Checking for model: SCP-7200
13:05:50.898 Checking for model: SCP-7300
13:05:50.898 Checking for model: SCP-8100
13:05:50.898 Checking for model: SCP-8100 (Bell Mobility)
13:05:50.898 Checking for model: SK6100 (Pelephone)
13:05:50.898 Checking for model: SPH-A460
13:05:50.898 Checking for model: SPH-A620 (VGA1000)

After this a message pops up saying "No Phone Detected/Recognized"

When I check the protocol log it seems that some data is getting to Bitpim such as the Software version, etc. Please see below



13:10:27.746 coms:[{'available': True, 'driverdate': (2001, 7, 1), 'description': 'Communications Port (COM1)', 'driverprovider': 'Microsoft', 'driverversion': '5.1.2600.0', 'hardwareinstance': 'ACPI\\PNP0501\\1', 'driverdescription': 'Communications Port', 'active': True, 'class': 'serial', 'name': 'COM1'}, {'available': True, 'driverdate': (2001, 7, 1), 'description': 'Communications Port (COM2)', 'driverprovider': 'Microsoft', 'driverversion': '5.1.2600.0', 'hardwareinstance': 'ACPI\\PNP0501\\2', 'driverdescription': 'Communications Port', 'active': True, 'class': 'serial', 'name': 'COM2'}, {'available': True, 'driverdate': (2002, 10, 15), 'description': 'LG CDMA USB Modem Diagnostic Serial Port Drivers (WDM) (COM3)', 'driverprovider': 'LG Electronics Inc.', 'driverversion': '3.35.0.600', 'hardwareinstance': 'USB\\VID_1004&PID_6000&MI_02\\6&15313397&0&2_02', 'driverdescription': 'LG CDMA USB Modem Diagnostic Serial Port Drivers (WDM)', 'active': True, 'class': 'serial', 'name': 'COM3'}, {'available': True, 'driverdate': (2002, 10, 15), 'description': 'LG CDMA USB Modem', 'driverprovider': 'LG Electronics Inc.', 'driverversion': '3.35.0.600', 'hardwareinstance': 'USB\\VID_1004&PID_6000&MI_00\\6&15313397&0&2_00', 'driverdescription': 'LG CDMA USB Modem', 'active': True, 'class': 'modem', 'name': 'COM4'}]
13:10:27.756 Available ports: ['COM1', 'COM2', 'COM3', 'COM4']
13:10:27.756 Available modem ports: ['COM4']
13:10:27.857 Gathering data on port: COM4
13:10:27.857 COM4: Opening port COM4, 115200 baud, timeout 1.000000, hardwareflow 0, softwareflow 0
13:10:27.857 COM4: Open of comm port suceeded
13:10:27.857 COM4: Writing Data - 8 bytes
00000000 41 54 45 30 56 31 0d 0a ATE0V1..

13:10:27.857 COM4: Reading remaining data Data - 4 bytes
00000000 4f 4b 0d 0a OK..

13:10:27.867 COM4: Writing Data - 8 bytes
00000000 41 54 2b 47 4d 49 0d 0a AT+GMI..

13:10:27.867 COM4: Reading remaining data Data - 33 bytes
00000000 2b 47 4d 49 3a 20 4c 47 20 45 6c 65 63 74 72 6f +GMI: LG Electro
00000010 6e 69 63 73 20 49 6e 63 2e 0d 0a 0d 0a 4f 4b 0d nics Inc.....OK.
00000020 0a .

13:10:27.867 COM4: Writing Data - 8 bytes
00000000 41 54 2b 47 4d 4d 0d 0a AT+GMM..

13:10:27.867 COM4: Reading remaining data Data - 24 bytes
00000000 2b 47 4d 4d 3a 20 56 58 36 31 30 30 20 31 30 38 +GMM: VX6100 108
00000010 0d 0a 0d 0a 4f 4b 0d 0a ....OK..

13:10:27.867 COM4: Writing Data - 8 bytes
00000000 41 54 2b 47 4d 52 0d 0a AT+GMR..

13:10:27.867 COM4: Reading remaining data Data - 45 bytes
00000000 2b 47 4d 52 3a 20 53 2f 57 20 56 45 52 3a 20 44 +GMR: S/W VER: D
00000010 50 33 2e 33 20 50 41 54 43 48 20 20 54 36 4e 56 P3.3 PATCH T6NV
00000020 5a 56 30 33 20 0d 0a 0d 0a 4f 4b 0d 0a ZV03 ....OK..

13:10:27.877 COM4: Writing Data - 8 bytes
00000000 41 54 2b 47 53 4e 0d 0a AT+GSN..

13:10:27.877 COM4: Reading remaining data Data - 22 bytes
00000000 2b 47 53 4e 3a 20 31 46 41 43 32 38 38 42 0d 0a +GSN: 1FAC288B..
00000010 0d 0a 4f 4b 0d 0a ..OK..

13:10:27.877 Done on port: COM4


Has anyone any ideas as to what I need to do to have the phone recognized. Is it possible I have a faulty cable? Any thoughts or ideas would be sincerely appreciated.

Thanks

 

Got it figured out and everything working with Bitpim. Autodetect function for LG phones is not working at present in Bitpim.