Tried to get this started. Installed Prolific Drivers. Installed BitPim. Get the following: com4: Connecting to port com4, 115200 baud, timeout 2.000000, hardwareflow 0 com4: Connection suceeded LG-VX4400: Phone initialised com4: Timed out waiting for 7e - 0 bytes read com4: Changing rate to 38400 com4: Timed out waiting for 7e - 0 bytes read com4: Changing rate to 38400 com4: Timed out waiting for 7e - 0 bytes read LG-VX4400: Manufacturer is LG-VX4400: Model is LG-VX4400: Software is com4: Timed out waiting for 7e - 0 bytes read com4: Changing rate to 38400 com4: Timed out waiting for 7e - 0 bytes read com4: Changing rate to 38400 com4: Timed out waiting for 7e - 0 bytes read Then a popup tells me to check port settings. I have phone set to USB and no other port setting on Bitpim (123) works at all. What am I doing wrong?
The error popup I get is the following: LG-VX4400 on com4: The phone is not responding while transitioning mode from none to brew. Check that port on the phone is set correctly. (menu->8->6->2: It is normally set to RS-232 COM port). Also check that you have selected the correct port on your computer and the cable is still firmly plugged in (currently using com4) So I set port to RS-232. No other port under settings (1235) goes anywhere at all. I am sure i am missing something very simple. Please help.
the cdm-8910 does not work with Bitpim, I checked. I cannot find any software that will work with it, without having to purchase the software for 39.00.
