WirelessAdvisor.com

Dreb · 01-11-2007, 5:53 PM

Wow, thanks. That thread is a godsend. The only thing is is that now I can't get MPT to recognize my V3mM, meaning it can't recognize it (it can be detected) and I can't find V3mM on the device list. can I just use V3cM? I read somewhere about how sometimes programs view them the same way...

Dreb · 01-11-2007, 5:59 PM

I transferred my first ringtone succesfully. Thanks so much for all your help, both on this forum and in the past ones that you posted on the internet.

killlllerzunittttted · 01-11-2007, 8:42 PM

I was previously able to go as far as getting mpt to see my v3m and have contact syncing options, but now it won't even install the drivers to recognize it as a usb modem. I think I may have made a bad seem edit when trying to get mpt to recognize it as a v3mm. Any thing I could try to see if I did make a bad seem edit or any suggestions to connect it again?

Also, I updated MPT to the latest the day before my pc stopped recognizing it, now MPT is back at 4.03. I think this might be because I was shutting my computer just by holding the power off button for a few seconds because until last night my computer wouldn't shut off any other way (I looked up a command line execution thing and use it now). Anyway MPT reverted to an earlier version the same night the pc stopped recognizing the razr as the Motorola USB Device. Suggestions appreciated please please and thanks

Cincyball · 01-11-2007, 9:07 PM

sounds like u need to run the drivertool4.21a again back on the first page. also, make sure u dont have comflicdting programs open at the same time, such as having mpt open when trying to use MSU, and vice versa. MSU goes with p2kseem. MPT needs to be run on its own.

killlllerzunittttted · 01-11-2007, 11:02 PM

I've tried driver tool many times... :/ When windows looks for drivers to install it never finds them however.

Cincyball · 01-11-2007, 11:17 PM

What if u choose to manually install them from a specific location (advanced), then choose "have disk" and browse to where you have the drivers (usually C:\WINDOWS\system32\drivers\usbsermpt) and it shoudl install the correct drivers. Does that do any good?

koviatt · 01-13-2007, 5:41 PM

I have spent the past four days digesting this forum- as I discovered how to seem my V3M. I just had to write and tell you how pleased I was to get everything working as you so patiently outlined. The questions were very valuable too, as they helped clarify many points.

Thank you so much for taking this so seriously and working with some of us who have never attempted such a fearful thing as hacking a new phone.

With deep respect and appreciation.

killlllerzunittttted · 01-14-2007, 2:48 PM

Quote:

Originally Posted by Cincyball

What if u choose to manually install them from a specific location (advanced), then choose "have disk" and browse to where you have the drivers (usually C:\WINDOWS\system32\drivers\usbsermpt) and it shoudl install the correct drivers. Does that do any good?

hmm usbsermpt isn't in there, any other known directories where I could find it?

Cincyball · 01-14-2007, 2:55 PM

what about 'usbmot2000"?

tozau · 01-14-2007, 5:12 PM

Ok, I followed the instructions and I can get my verizon razr v3m to start charging (the screen shows the phone in device manager under modems exactly like your picture), but I can't get it to sync with wmp 11. I restarted the computer and ran mtpfix and it says removing devices then done! What am I doing wrong?

Help please!

tozau · 01-14-2007, 5:20 PM

Nevermind, it just started working...thanks for the posts...now is there any way to load new ringtones without buying them from verizon?

Cincyball · 01-14-2007, 10:43 PM

Quote:

Originally Posted by tozau

Nevermind, it just started working...thanks for the posts...now is there any way to load new ringtones without buying them from verizon?

Yes.

http://forums.wirelessadvisor.com/ra...work-razr.html (Motorola Phone Tools doesn't work with RAZR V3m?)

timh831 · 01-18-2007, 4:25 PM

Where do I get the Motorola Software Updater? I have a Sprint Motorola V3m.

Cincyball · 01-18-2007, 5:33 PM

Quote:

Originally Posted by timh831

Where do I get the Motorola Software Updater? I have a Sprint Motorola V3m.

http://www.hacktherazr.com/downloads.html

timh831 · 01-19-2007, 2:07 AM

Ok, I downloaded and installed the USB Driver Tool, the USB Device Driver and the Motorola Software Updater but when I plug in the phone the pc find's new hardware "Motorola Communication Interface" and it can't find the drivers even though I point to the folder that I placed them in.

cephurs · 01-20-2007, 1:11 PM

Quote:

Originally Posted by Cincyball

Hate to be the bearer of bad news, but Java games cannot be run on Brew. Verizon, Alltel, USCC, and more use Brew, which means the games needto be digitally signed for each specific ESN. Our phones dont have teh bility to run Java apps (as of yet). Some people are working on it, but for now, I think the only CDMA phone that runs Java is the Sprint V3m. So until someone figures out how to get Java run ontop of Brew, we are stuck buying them from the service provider

any new developments that allow Java on verizon v3m?

Cincyball · 01-20-2007, 3:10 PM

Nope, with the advent of the Alltel v3m firmware coming out, any progress came to a halt.

mattlett14 · 01-22-2007, 8:57 PM

ok so i got everything to work, and it says that it synced the music to my phone, but now i cant find it? Any idea where it might be? I have a Verizon Razr V3m.

Cincyball · 01-22-2007, 9:58 PM

Get Tunes and Tones->My Music

mattlett14 · 01-22-2007, 10:55 PM

hmm, it's there but it doesnt seem to want to play. its in wma format, but just says it cant play.

DTK28 · 01-23-2007, 4:53 PM

OK so I have successfully gotten my phone to charge thru the usb cable on my computer. yet i cannot get it to sync with WMP 11. it doesn't list my phone as a device in wmp 11. also I am using the verizon v3m. I am using Windows XP Home Edition Version 2002 Service Pack 2. any help is appreciated cincy.

Cincyball · 01-23-2007, 5:03 PM

Did u try the mtpfix.exe on the first page of this thread?

DTK28 · 01-23-2007, 5:07 PM

I just ran the mtpfix and wmp 11 still says connect device. I clicked refresh devices and it still doesn't show my phone.

DTK28 · 01-23-2007, 5:54 PM

Now after i ran the mtpfix, turn my phone on and plug into usb a pop up balloon comes up and say found new hardware MTP Device.

DTK28 · 01-23-2007, 6:33 PM

any help from anyone???

kashmoney623 · 01-23-2007, 7:25 PM

OK this seems like the right forum to be in......i did whatever was posted on the first page of this topic...but instead of getting "Found Motorola V3c" and then say "Found Motorola USB Modem" i get "Found Motorola V3c" and then it asks for drivers. I downloaded the V3c drivers and pointed the wizard to the folder but nothing I try works. I'm completely lost right now, any help would be appreciated.

Oh and by the way, all that was done while I had WMP 10. I have WMP 11 right now.

01-11-2007, 5:53 PM	#151 (permalink)
Dreb No more newbie here! Join Date: Jan 2007 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected Wow, thanks. That thread is a godsend. The only thing is is that now I can't get MPT to recognize my V3mM, meaning it can't recognize it (it can be detected) and I can't find V3mM on the device list. can I just use V3cM? I read somewhere about how sometimes programs view them the same way...

01-11-2007, 5:59 PM	#152 (permalink)
Dreb No more newbie here! Join Date: Jan 2007 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected I transferred my first ringtone succesfully. Thanks so much for all your help, both on this forum and in the past ones that you posted on the internet.

01-11-2007, 8:42 PM	#153 (permalink)
killlllerzunittttted Movin' on up! Join Date: Jan 2007 Posts: 7 Phone(s): Razr V3m Provider(s): Verizon Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected I was previously able to go as far as getting mpt to see my v3m and have contact syncing options, but now it won't even install the drivers to recognize it as a usb modem. I think I may have made a bad seem edit when trying to get mpt to recognize it as a v3mm. Any thing I could try to see if I did make a bad seem edit or any suggestions to connect it again? Also, I updated MPT to the latest the day before my pc stopped recognizing it, now MPT is back at 4.03. I think this might be because I was shutting my computer just by holding the power off button for a few seconds because until last night my computer wouldn't shut off any other way (I looked up a command line execution thing and use it now). Anyway MPT reverted to an earlier version the same night the pc stopped recognizing the razr as the Motorola USB Device. Suggestions appreciated please please and thanks

01-11-2007, 9:07 PM	#154 (permalink)
Cincyball Issss a niiiiice. High 5! Join Date: Jul 2006 Location: CT Posts: 1,856 Phone(s): V3m w/ Alltel V3m Flash Provider(s): Verizon Devices: H700, 80 GB iPod Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected sounds like u need to run the drivertool4.21a again back on the first page. also, make sure u dont have comflicdting programs open at the same time, such as having mpt open when trying to use MSU, and vice versa. MSU goes with p2kseem. MPT needs to be run on its own. __________________ Verizon V3m Flashed to Alltel V3m NCR_01.1A.00R...EVERYTHING working!!!

01-11-2007, 11:02 PM	#155 (permalink)
killlllerzunittttted Movin' on up! Join Date: Jan 2007 Posts: 7 Phone(s): Razr V3m Provider(s): Verizon Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected I've tried driver tool many times... :/ When windows looks for drivers to install it never finds them however.

01-11-2007, 11:17 PM	#156 (permalink)
Cincyball Issss a niiiiice. High 5! Join Date: Jul 2006 Location: CT Posts: 1,856 Phone(s): V3m w/ Alltel V3m Flash Provider(s): Verizon Devices: H700, 80 GB iPod Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected What if u choose to manually install them from a specific location (advanced), then choose "have disk" and browse to where you have the drivers (usually C:\WINDOWS\system32\drivers\usbsermpt) and it shoudl install the correct drivers. Does that do any good? __________________ Verizon V3m Flashed to Alltel V3m NCR_01.1A.00R...EVERYTHING working!!!

01-13-2007, 5:41 PM	#157 (permalink)
koviatt Get me out of Newbieville! Join Date: Jan 2007 Location: North Carolina Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected I have spent the past four days digesting this forum- as I discovered how to seem my V3M. I just had to write and tell you how pleased I was to get everything working as you so patiently outlined. The questions were very valuable too, as they helped clarify many points. Thank you so much for taking this so seriously and working with some of us who have never attempted such a fearful thing as hacking a new phone. With deep respect and appreciation.

01-14-2007, 2:55 PM	#159 (permalink)
Cincyball Issss a niiiiice. High 5! Join Date: Jul 2006 Location: CT Posts: 1,856 Phone(s): V3m w/ Alltel V3m Flash Provider(s): Verizon Devices: H700, 80 GB iPod Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected what about 'usbmot2000"?

01-14-2007, 5:12 PM	#160 (permalink)
tozau I have arrived! Join Date: Jan 2007 Location: Elgin, OK Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected Ok, I followed the instructions and I can get my verizon razr v3m to start charging (the screen shows the phone in device manager under modems exactly like your picture), but I can't get it to sync with wmp 11. I restarted the computer and ran mtpfix and it says removing devices then done! What am I doing wrong? Help please!

01-14-2007, 5:20 PM	#161 (permalink)
tozau I have arrived! Join Date: Jan 2007 Location: Elgin, OK Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected Nevermind, it just started working...thanks for the posts...now is there any way to load new ringtones without buying them from verizon?

01-18-2007, 4:25 PM	#163 (permalink)
timh831 I have arrived! Join Date: Jan 2007 Location: California Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected Where do I get the Motorola Software Updater? I have a Sprint Motorola V3m.

01-19-2007, 2:07 AM	#165 (permalink)
timh831 I have arrived! Join Date: Jan 2007 Location: California Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected Ok, I downloaded and installed the USB Driver Tool, the USB Device Driver and the Motorola Software Updater but when I plug in the phone the pc find's new hardware "Motorola Communication Interface" and it can't find the drivers even though I point to the folder that I placed them in.

01-20-2007, 3:10 PM	#167 (permalink)
Cincyball Issss a niiiiice. High 5! Join Date: Jul 2006 Location: CT Posts: 1,856 Phone(s): V3m w/ Alltel V3m Flash Provider(s): Verizon Devices: H700, 80 GB iPod Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected Nope, with the advent of the Alltel v3m firmware coming out, any progress came to a halt.

01-22-2007, 8:57 PM	#168 (permalink)
mattlett14 I have arrived! Join Date: Jan 2007 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected ok so i got everything to work, and it says that it synced the music to my phone, but now i cant find it? Any idea where it might be? I have a Verizon Razr V3m.

01-22-2007, 9:58 PM	#169 (permalink)
Cincyball Issss a niiiiice. High 5! Join Date: Jul 2006 Location: CT Posts: 1,856 Phone(s): V3m w/ Alltel V3m Flash Provider(s): Verizon Devices: H700, 80 GB iPod Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected Get Tunes and Tones->My Music

01-22-2007, 10:55 PM	#170 (permalink)
mattlett14 I have arrived! Join Date: Jan 2007 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected hmm, it's there but it doesnt seem to want to play. its in wma format, but just says it cant play.

01-23-2007, 4:53 PM	#171 (permalink)
DTK28 Fresh Member Join Date: Jan 2007 Posts: 19 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected OK so I have successfully gotten my phone to charge thru the usb cable on my computer. yet i cannot get it to sync with WMP 11. it doesn't list my phone as a device in wmp 11. also I am using the verizon v3m. I am using Windows XP Home Edition Version 2002 Service Pack 2. any help is appreciated cincy.

01-23-2007, 5:03 PM	#172 (permalink)
Cincyball Issss a niiiiice. High 5! Join Date: Jul 2006 Location: CT Posts: 1,856 Phone(s): V3m w/ Alltel V3m Flash Provider(s): Verizon Devices: H700, 80 GB iPod Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected Did u try the mtpfix.exe on the first page of this thread?

01-23-2007, 5:07 PM	#173 (permalink)
DTK28 Fresh Member Join Date: Jan 2007 Posts: 19 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected I just ran the mtpfix and wmp 11 still says connect device. I clicked refresh devices and it still doesn't show my phone.

01-23-2007, 5:54 PM	#174 (permalink)
DTK28 Fresh Member Join Date: Jan 2007 Posts: 19 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected Now after i ran the mtpfix, turn my phone on and plug into usb a pop up balloon comes up and say found new hardware MTP Device.

01-23-2007, 6:33 PM	#175 (permalink)
DTK28 Fresh Member Join Date: Jan 2007 Posts: 19 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected any help from anyone???

01-23-2007, 7:25 PM	#176 (permalink)
kashmoney623 Shoulda joined long ago! Join Date: Jan 2007 Location: Schenectady, NY Posts: 3 Phone(s): RAZR V3m Provider(s): Verizon Thanks: 0 Thanked 0 Times in 0 Posts	Re: Getting your V3C/M Connected OK this seems like the right forum to be in......i did whatever was posted on the first page of this topic...but instead of getting "Found Motorola V3c" and then say "Found Motorola USB Modem" i get "Found Motorola V3c" and then it asks for drivers. I downloaded the V3c drivers and pointed the wizard to the folder but nothing I try works. I'm completely lost right now, any help would be appreciated. Oh and by the way, all that was done while I had WMP 10. I have WMP 11 right now.

WirelessAdvisor.com

Clearing the static since 1998.