WirelessAdvisor.com

hihoslva · 05-06-2002, 10:19 AM

I just signed up with AT&T the other day, and got a great deal on two v60's using a shared minutes plan.

Problem is, AT&T doesn't alow changing the alpha tags on the phone, so the "banner" inside on the display reads "shared" on both phones. I need to be able to differentiate between these phones, and neither AT&T or Motorola would help me to re-program the phone to allow the banner to be changed.

I know that AT&T doesn't "allow" changing the alpha tag (which is very irritating in and of itself - I bought the phone, I should be able to whatever I want with it), but I think we all know that cell phones can be field programmed to do all kinds of things no one wants to tell you about. I had a VoiceStream Nokia 3390 before this, and the programming codes were all over the internet as to how to change all kinds of options not listed in the manual, but I can't find anything about the Motorola v60.

AT&T tech department wouldn't give me the info, but basically they admitted it can be done.

Does anyone have any technical info on re-programming AT&T Motorola v60 phones??

Malial · 05-06-2002, 10:45 AM

see this thread...

hihoslva · 05-06-2002, 10:59 AM

Thanks for the link - BUT....

Looked like it was going to work - but once I returned to the main screen, the "shared" was back again!!

And now I can't get into the nam mode again....

gonna post over there, but thanks!!

velvet66 · 05-25-2002, 4:37 PM

i just bought the v60c today from verizon. i tried the code that you mentioned, and all the phone does is try to dial the number. ? any suggestions?

hihoslva · 05-25-2002, 4:45 PM

Mine does that sometimes, too. Make 100% sure you are putting in the correct sequence, including the #'s (I realized I was using the * for a while - moron [img]i/expressions/face-icon-small-smile.gif[/img]), then just keep trying it. For some reason, sometimes it tries to dial the number, instead of ask for the security code. Just do it again and again (and I think trying to enter the #PROGRAM# thing quickly helps - not lightning fast, just try to do it in 5 seconds or so from the time you start entering to the time you hit "send". Not sure, but I think it helps).

Eventually you'll get in.

Wait - Verizon? This should be an option on one of the menus, and you shouldn't need to go into the NAM setup. Check the maunual - I know it's in there.

Tapan · 09-05-2002, 4:11 PM

what was the code u tried

09-11-2002, 8:34 AM

At PageOne Plus, We unlock, and program all Cellular phones.

Please call: Clarence @ 1-866-US-NOKIA

njsvrzncdma · 09-11-2002, 4:12 PM

look if you want to change the alpha tag just hit #program# send . the go into nam setup. level one then scroll down to home tag and then change it to what you want. the phone will shut off, then turn on and will say no service for about 5 seconds. then the banner that you typed in will appear.

CPUN · 09-12-2002, 9:03 PM

This works for me, go to MENU and put this in fast, but not that fast.

073887*

Security code should pop up.

Shaggy · 09-16-2002, 1:47 PM

I was able to get up to the point to enter in the security code, but 000000 didn't work. Can you please reply with the correct security code for a V60t on AT&T's network. Thanks.

njsvrzncdma · 09-17-2002, 10:03 AM

the security code doesnt change from phone to phone. the stock code from motorola is 000000. try 123456. if thats not it go to at&t maybe they changed it.

MystikBizkitt · 09-24-2002, 3:06 PM

I was woundering if anyone knew how to change the text on the outer display when the phone is flipped open. Mine says AT&T Wireless, any way to change that [img]i/expressions/face-icon-small-smile.gif[/img]

Topgun357 · 11-05-2002, 10:23 PM

I would like to learn all I can about changing the codes of the V60t
Could the life timer be reset?
[img]i/expressions/face-icon-small-happy.gif[/img]

11-05-2002, 10:32 PM

No once you go that way you cant be reset

11-06-2002, 8:37 AM

Anybody know how to change the display on the outside of the phone when it is flipped open?

rayauthentics · 11-06-2002, 12:24 PM

i need help with my phone i put tha security code in it and now it doesnt want to go back to normal i tried everything its just alot of words and numbers my phone is really messed up can anyone help me??? please really fast thank you

rayauthentics · 11-06-2002, 8:26 PM

does neone know how to change the text from tha outside of the phone???? please tell me that would be very cool

TwiNkLe · 11-08-2002, 12:46 AM

i was wondering if someone could please post the link to the site that has the programming codes again. [img]i/expressions/face-icon-small-confused.gif[/img] there's an error when i click on it! thanks i would appreciate it very much

11-08-2002, 1:34 AM

nevermind i figured it out by myself! but thanks to anyone who could've helped [img]i/expressions/face-icon-small-smile.gif[/img]

oh yeah! but if anyone figures out how to change the outside display saying "at&t wireless" please let me know! thanks again

11-08-2002, 1:36 AM

by the way that last post was me twinkle...i forgot to log back on. [img]i/expressions/face-icon-small-tongue.gif[/img]

thekid · 11-25-2002, 10:14 PM

menu+073887*....security code 00000.....NAM set up .....level 1..scroll down...change home tag

kkisjjang · 11-25-2002, 11:53 PM

Thanks aloT~

I finally got rid of that AT&T banner.

I noticed lot of options and anyone figured out how to tweak anything else besides the banner? Especially the AT&T Wireless on the external screen.

Rockus · 01-19-2003, 7:52 PM

hiow can i check it my phone is gms or tmda? i have a motorloa v60c .. please help .. thanks.

05-06-2002, 10:19 AM	#1
hihoslva Fresh Member Join Date: May 2002 Posts: 22 Thanks: 0 Thanked 0 Times in 0 Posts	Motorola v60 - AT&T - programming codes??? I just signed up with AT&T the other day, and got a great deal on two v60's using a shared minutes plan. Problem is, AT&T doesn't alow changing the alpha tags on the phone, so the "banner" inside on the display reads "shared" on both phones. I need to be able to differentiate between these phones, and neither AT&T or Motorola would help me to re-program the phone to allow the banner to be changed. I know that AT&T doesn't "allow" changing the alpha tag (which is very irritating in and of itself - I bought the phone, I should be able to whatever I want with it), but I think we all know that cell phones can be field programmed to do all kinds of things no one wants to tell you about. I had a VoiceStream Nokia 3390 before this, and the programming codes were all over the internet as to how to change all kinds of options not listed in the manual, but I can't find anything about the Motorola v60. AT&T tech department wouldn't give me the info, but basically they admitted it can be done. Does anyone have any technical info on re-programming AT&T Motorola v60 phones??

09-05-2002, 4:11 PM	#6
Tapan I made my first post! Join Date: Sep 2002 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	Motorola v60 - AT&T - programming codes??? what was the code u tried

09-11-2002, 8:34 AM	#7
Guest Posts: n/a	Motorola v60 - AT&T - programming codes??? At PageOne Plus, We unlock, and program all Cellular phones. Please call: Clarence @ 1-866-US-NOKIA

09-11-2002, 4:12 PM	#8
njsvrzncdma i cant stop the ringing.. Join Date: Aug 2002 Location: JeRsEy Posts: 2,576 Phone(s): LG vx8500, LG vx8100 Provider(s): VERIZON Devices: MP3, GPS, Wireless LAN, TV remote (lol) Thanks: 0 Thanked 0 Times in 0 Posts My Auctions	Motorola v60 - AT&T - programming codes??? look if you want to change the alpha tag just hit #program# send . the go into nam setup. level one then scroll down to home tag and then change it to what you want. the phone will shut off, then turn on and will say no service for about 5 seconds. then the banner that you typed in will appear. __________________ "Be fruitful, curious, careful, intelligent, spontanious and wise but never forget to have fun, never forget to remember the good times, and always be true to yourself."

09-12-2002, 9:03 PM	#9
CPUN No more newbie here! Join Date: Sep 2002 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	Motorola v60 - AT&T - programming codes??? This works for me, go to MENU and put this in fast, but not that fast. 073887* Security code should pop up.

WirelessAdvisor.com

MOTOROLA

Motorola v60 - AT&T - programming codes??? in Wireless Phones Forums; "I just signed up with AT&T the other day, and ..."

WirelessAdvisor.com

05-06-2002, 10:45 AM	#2
Malial Join Date: Feb 2002 Location: Columbus, Ohio Posts: 749 Phone(s): Motorola v710 Provider(s): Verizon Devices: Dell Axim X5 Advance, palmOne Tungsten T5 Thanks: 0 Thanked 0 Times in 0 Posts	see this thread...

05-06-2002, 10:59 AM	Original Poster #3
hihoslva Fresh Member Join Date: May 2002 Posts: 22 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks for the link - BUT.... Looked like it was going to work - but once I returned to the main screen, the "shared" was back again!! And now I can't get into the nam mode again.... gonna post over there, but thanks!!

05-25-2002, 4:37 PM	#4
velvet66 I made my first post! Join Date: May 2002 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	i just bought the v60c today from verizon. i tried the code that you mentioned, and all the phone does is try to dial the number. ? any suggestions?

05-25-2002, 4:45 PM	Original Poster #5
hihoslva Fresh Member Join Date: May 2002 Posts: 22 Thanks: 0 Thanked 0 Times in 0 Posts	Mine does that sometimes, too. Make 100% sure you are putting in the correct sequence, including the #'s (I realized I was using the * for a while - moron [img]i/expressions/face-icon-small-smile.gif[/img]), then just keep trying it. For some reason, sometimes it tries to dial the number, instead of ask for the security code. Just do it again and again (and I think trying to enter the #PROGRAM# thing quickly helps - not lightning fast, just try to do it in 5 seconds or so from the time you start entering to the time you hit "send". Not sure, but I think it helps). Eventually you'll get in. Wait - Verizon? This should be an option on one of the menus, and you shouldn't need to go into the NAM setup. Check the maunual - I know it's in there.

09-16-2002, 1:47 PM	#10
Shaggy I have arrived! Join Date: Sep 2002 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Motorola v60 - AT&T - programming codes??? I was able to get up to the point to enter in the security code, but 000000 didn't work. Can you please reply with the correct security code for a V60t on AT&T's network. Thanks.

09-17-2002, 10:03 AM	#11
njsvrzncdma i cant stop the ringing.. Join Date: Aug 2002 Location: JeRsEy Posts: 2,576 Phone(s): LG vx8500, LG vx8100 Provider(s): VERIZON Devices: MP3, GPS, Wireless LAN, TV remote (lol) Thanks: 0 Thanked 0 Times in 0 Posts My Auctions	Motorola v60 - AT&T - programming codes??? the security code doesnt change from phone to phone. the stock code from motorola is 000000. try 123456. if thats not it go to at&t maybe they changed it. __________________ "Be fruitful, curious, careful, intelligent, spontanious and wise but never forget to have fun, never forget to remember the good times, and always be true to yourself."

09-24-2002, 3:06 PM	#12
MystikBizkitt Posting up a storm! Join Date: Jul 2002 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Motorola v60 - AT&T - programming codes??? I was woundering if anyone knew how to change the text on the outer display when the phone is flipped open. Mine says AT&T Wireless, any way to change that [img]i/expressions/face-icon-small-smile.gif[/img]

11-05-2002, 10:23 PM	#13
Topgun357 Posting up a storm! Join Date: Nov 2002 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Motorola v60 - AT&T - programming codes??? I would like to learn all I can about changing the codes of the V60t Could the life timer be reset? [img]i/expressions/face-icon-small-happy.gif[/img]

11-05-2002, 10:32 PM	#14
Guest Posts: n/a	Motorola v60 - AT&T - programming codes??? No once you go that way you cant be reset

11-06-2002, 8:37 AM	#15
Guest Posts: n/a	Motorola v60 - AT&T - programming codes??? Anybody know how to change the display on the outside of the phone when it is flipped open?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads for: Motorola v60 - AT&T - programming codes???
Thread	Thread Starter	Forum	Replies	Last Post
kyocera 2035 programming codes	eduarnar	All Other Brands of Wireless Phones	1	01-11-2004 4:06 PM
Nokia Programming Codes	SoMaji	NOKIA	3	05-21-2003 8:36 AM
T720i Programming Codes?	SMaji	MOTOROLA	0	03-12-2003 9:38 AM
Motorola t720 programming codes	Xyloc	MOTOROLA	15	12-11-2002 2:35 PM
Motorola i90c programming codes	sprintpcssucks	Southern US Wireless Forum	0	11-25-2002 9:32 AM

11-06-2002, 12:24 PM	#16
rayauthentics Fresh Member Join Date: Oct 2002 Posts: 34 Thanks: 0 Thanked 0 Times in 0 Posts	Motorola v60 - AT&T - programming codes??? i need help with my phone i put tha security code in it and now it doesnt want to go back to normal i tried everything its just alot of words and numbers my phone is really messed up can anyone help me??? please really fast thank you

11-06-2002, 8:26 PM	#17
rayauthentics Fresh Member Join Date: Oct 2002 Posts: 34 Thanks: 0 Thanked 0 Times in 0 Posts	Motorola v60 - AT&T - programming codes??? does neone know how to change the text from tha outside of the phone???? please tell me that would be very cool

11-08-2002, 12:46 AM	#18
TwiNkLe Fresh Member Join Date: Nov 2002 Posts: 45 Thanks: 0 Thanked 0 Times in 0 Posts	Motorola v60 - AT&T - programming codes??? i was wondering if someone could please post the link to the site that has the programming codes again. [img]i/expressions/face-icon-small-confused.gif[/img] there's an error when i click on it! thanks i would appreciate it very much

11-08-2002, 1:34 AM	#19
Guest Posts: n/a	Motorola v60 - AT&T - programming codes??? nevermind i figured it out by myself! but thanks to anyone who could've helped [img]i/expressions/face-icon-small-smile.gif[/img] oh yeah! but if anyone figures out how to change the outside display saying "at&t wireless" please let me know! thanks again

11-08-2002, 1:36 AM	#20
Guest Posts: n/a	Motorola v60 - AT&T - programming codes??? by the way that last post was me twinkle...i forgot to log back on. [img]i/expressions/face-icon-small-tongue.gif[/img]

11-25-2002, 10:14 PM	#21
thekid I have arrived! Join Date: Nov 2002 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Motorola v60 - AT&T - programming codes??? menu+073887*....security code 00000.....NAM set up .....level 1..scroll down...change home tag

11-25-2002, 11:53 PM	#22
kkisjjang Fresh Member Join Date: Nov 2002 Posts: 18 Thanks: 0 Thanked 0 Times in 0 Posts	Motorola v60 - AT&T - programming codes??? Thanks aloT~ I finally got rid of that AT&T banner. I noticed lot of options and anyone figured out how to tweak anything else besides the banner? Especially the AT&T Wireless on the external screen.

01-19-2003, 7:52 PM	#23
Rockus Movin' on up! Join Date: Dec 2002 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Motorola v60 - AT&T - programming codes??? hiow can i check it my phone is gms or tmda? i have a motorloa v60c .. please help .. thanks.