latest wap settings? recap

[siemon321]

Clearing the cache didn't work - ended up with the same error message ("Feature Not Available"). Any other ideas, or am I out of luck?

[siemon321]

OK, I just cleared the cache, reset the Link 1 IP 1 address to 012.025.203.011 and reset Link 1 Port 1 to 9201. Then I changed back to Proxy 1 and edited the homepage to http://tagtag.com/flexia. When I hit "OK", the browser crunched for a little while and then came back with the following error message:

"Not Found
The requested object does not exist on this server. The link you followed is either outdated, inaccurate, or the server has been instructed not to let you have it."

Any idea what this means? Thanks for all your help!

[zell8902]

yeah me 2 the WAP anit working ne more. It keeps brging to some werid site, and something the homepage dont work any more. I reset the broswer and didnt help, any ideas wats going on wit the vx-6000

[Tony E!]

Originally Posted by zell8902

yeah me 2 the WAP anit working ne more. It keeps brging to some werid site, and something the homepage dont work any more. I reset the broswer and didnt help, any ideas wats going on wit the vx-6000

Got your PM..
You got PM...

[zell8902]

I tried setting my Wap to get free internet on my LG VX6000. When You go Menu => 0 => 0000=>9 (wap settings) => Here's where I pushed 6 to reset browser on accident. Phone restarted and the i.p. adress was all zeros. I tried resetting the numbers manually but to no luck. Now when I go to access the internet on my phone it immidiately goes to "Internet service is not enabled" screen. Any suggestions would help. I also updated my software since it happened and I still have the same problem

This is wat i did and i cant get it 2 work... DAMN IT I WANT MY FREE WAP

Please Some On Tell Me Wat 2 do

Nothing is working i homepage dont work, it dont load up any more, i want it plz :'(

[zell8902]

Quote:
Originally Posted by zell8902
hey can u please help me wit my wap problem..

I tried setting my Wap to get free internet on my LG VX6000. When You go Menu => 0 => 0000=>9 (wap settings) => Here's where I pushed 6 to reset browser on accident. Phone restarted and the i.p. adress was all zeros. I tried resetting the numbers manually but to no luck. Now when I go to access the internet on my phone it immidiately goes to "Internet service is not enabled" screen. Any suggestions would help. I also updated my software since it happened and I still have the same problem

Nothing is working i homepage dont work, it dont load up any more, i want it plz :'(


OK lets try this, first lets get your phone back to factory status:

go to the service menu like you did before:
menu 0 > 000000 > wap settings:

now go into "IP SETTINGS"
now type this IP in IP 1 > 199.074.153.210

now go back and go into your "PORT SETTINGS"
now type this port number on port 1 > 9203

start your browser press and hole "0" zero
go to "advanced settings" > changed homepage"
and type in your default homepage >http://openwave


and then u just put the ip in ip 2 link 1 and the port in port 2 link 1 and set the homepage to what works for u.

ALL THANKS TO TONY E( we love u )

::

[Tony E!]

Originally Posted by zell8902

Quote:
Originally Posted by zell8902
hey can u please help me wit my wap problem..

I tried setting my Wap to get free internet on my LG VX6000. When You go Menu => 0 => 0000=>9 (wap settings) => Here's where I pushed 6 to reset browser on accident. Phone restarted and the i.p. adress was all zeros. I tried resetting the numbers manually but to no luck. Now when I go to access the internet on my phone it immidiately goes to "Internet service is not enabled" screen. Any suggestions would help. I also updated my software since it happened and I still have the same problem

Nothing is working i homepage dont work, it dont load up any more, i want it plz :'(


OK lets try this, first lets get your phone back to factory status:

go to the service menu like you did before:
menu 0 > 000000 > wap settings:

now go into "IP SETTINGS"
now type this IP in IP 1 > 199.074.153.210

now go back and go into your "PORT SETTINGS"
now type this port number on port 1 > 9203

start your browser press and hole "0" zero
go to "advanced settings" > changed homepage"
and type in your default homepage >http://openwave


and then u just put the ip in ip 2 link 1 and the port in port 2 link 1 and set the homepage to what works for u.

ALL THANKS TO TONY E( we love u )

::

HM? That looks just like the instructions i sent you via private message...lol
glad it worked for you.........

[siemon321]

Tony E,

In zell8902's instructions, did he mean to say "link 2 ip1 and link 2 port 1" or is it really link 1 ip2 and link 1 port 2? I'm trying both ways but still having problems getting anything. Any help would be greatly appreciated. Thanks!

[Tony E!]

Originally Posted by siemon321

Tony E,

In zell8902's instructions, did he mean to say "link 2 ip1 and link 2 port 1" or is it really link 1 ip2 and link 1 port 2? I'm trying both ways but still having problems getting anything. Any help would be greatly appreciated. Thanks!

If you don't want to change your default settings is always good to use "link 2 ip 1 link 2 port 1...

[siemon321]

Originally Posted by Tony E

If you don't want to change your default settings is always good to use "link 2 ip 1 link 2 port 1...

OK, I reset link 1 ip1 and link 1 port 1 to the default settings, and changed link 2 ip 1 and link 2 port 1 to one of the recommended ip addresses (067.081.010.155 and 9201). Then I changed to WAP Proxy 2 and changed the homepage to http://tagtag.com/flexia. When I hit OK, the browser cranks for a while (it says "Sending)))))))))))..."), then finally times out and says "Server not responding". When I go back to Advanced Settings and check the homepage again, it is back to the Openwave.com homepage.

Any advice for how to fix this? Is the problem with the homepage, or with the IP address, or with my phone?

Thanks!

[Tony E!]

Originally Posted by siemon321

OK, I reset link 1 ip1 and link 1 port 1 to the default settings, and changed link 2 ip 1 and link 2 port 1 to one of the recommended ip addresses (067.081.010.155 and 9201). Then I changed to WAP Proxy 2 and changed the homepage to http://tagtag.com/flexia. When I hit OK, the browser cranks for a while (it says "Sending)))))))))))..."), then finally times out and says "Server not responding". When I go back to Advanced Settings and check the homepage again, it is back to the Openwave.com homepage.

Any advice for how to fix this? Is the problem with the homepage, or with the IP address, or with my phone?

Thanks!

it could be a combination of both but most likely the IP.

[VaderGuy]

I am still unable to get the free wap to work on the VX6100. I can't figure out how the instructions here line up with the 6100's menus, and the port always resets to 8080 no matter what I enter.

The good thing is that it has a reset browser selection, so it reverts back easily enough after all my futzing.

If anyone has been able to set this up on a 6100, please let me know how it was done. Thanks!

[Tony E!]

Originally Posted by VaderGuy

I am still unable to get the free wap to work on the VX6100. I can't figure out how the instructions here line up with the 6100's menus, and the port always resets to 8080 no matter what I enter.

The good thing is that it has a reset browser selection, so it reverts back easily enough after all my futzing.

If anyone has been able to set this up on a 6100, please let me know how it was done. Thanks!

Keep in mind that the wap settings for the 6000 are different than the ones for the 6100....

[climber]

Originally Posted by Tony E

Keep in mind that the wap settings for the 6000 are different than the ones for the 6100....

A search on 6100 and WAP reveals only this thread.

Other sites (howardforums) suggest that the 6100 must use port 8080 which leaves these users with minimal options.

I have seen some people setting up their own hosting service if they have a 24/7 connection.

Do you have any other information or ideas for 6100 users that don't want to go that route?

[Tony E!]

Originally Posted by climber

A search on 6100 and WAP reveals only this thread.

Other sites (howardforums) suggest that the 6100 must use port 8080 which leaves these users with minimal options.

I have seen some people setting up their own hosting service if they have a 24/7 connection.

Do you have any other information or ideas for 6100 users that don't want to go that route?

Hey Climber so far that's all i have also, if i find out otherwise i will keep you posted, you do the same......

[ike301]

Originally Posted by Tony E

Originally Posted by Moses
12.25.203.11
port 9201

67.81.10.155
port 9201

Those are the two IPs that have been working for me since February. The second one lets me change the homepage but with the first one I have to use the default openwave homepage.

Tony, forgive my ignorance. But have you or anyone been able to access the openwave/cool sites/sports/espn? (using 12.25.203.11)

I used to be able to access it with no problem. Now I get a:

"Not Found.... requested object does not exist...outdated...or the server has been instructed not to let you have it."

Thoughts suggestions? Alternate IP/port addys?

Thanks, bro.
Ike

[jjfdvm72]

I accidentally reset my wap settings too. Now when I put in the IP and Port #'s as mentioned before (199.074.153.210 port: 9203) and the homepage http://www.openwave.com, I get the following error:

"Security is not enabled. Enabling security can take several minutes. Proceed?"

I press YES and then I get: "Security error: key not recognized"???

Any suggestions?

[MMBB0132301]

Originally Posted by Tony E

HM? That looks just like the instructions i sent you via private message...lol
glad it worked for you.........

i have the VX7000 Black; are the instructions the same as the 6000/6100 for free wap settings. if so, or not, could you be more specific; step-by-step for getting free wap for the VX7000 Black, thnx

[Stupiud]

Originally Posted by jjfdvm72

I accidentally reset my wap settings too. Now when I put in the IP and Port #'s as mentioned before (199.074.153.210 port: 9203) and the homepage http://www.openwave.com, I get the following error:

"Security is not enabled. Enabling security can take several minutes. Proceed?"

I press YES and then I get: "Security error: key not recognized"???

Any suggestions?

yea, dont activate security!

and make sure you are using the right proxy... start your browswer, press zero and hold... in the menu go to advanced and then to proxy... make sure u select the right one taht u changed the IPs and Ports too.... (IE: if you changed IP and Port 'One' you have to use proxy one.)

[Greenie17]

So I have a KX2 Kyocera on a Verizon network... and I am a bit confused on what I put where for the wap settings...

Pressing 0 from the web browser does nothing, so I loaded the Kyocera wireless software to go into specific settings on the phone. Here is what I have on the Browser tab.

Web link DNS 1
Web link DNS 2
Web link DNS 3
Web Link A Main IP
Web Link A Main Port
Web Link A Backup IP
Web Link A Backup Port
Link A Access Keys
Web Link B Main IP
Web Link B Main Port
Web Link B Backup IP
Web Link B Backup Port
Link B Access Keys
Server A Primary URL
Server B Primary URL
Server A Secondary URL
Server B Secondary URL

So now what ip get's put where? I am so confused. If I try to connect, I was getting no web browser enabled and dial *611. Then I made some changes and now I am just getting a timeout. Never conected yet. Can anyone help?

[Tony E!]

The reason why 0 doesn't work for you is because those settings are for LG phones only, you may want to try the Kyocera forum for wap settings there..or you can get an LG phone and join us here in the LG forum..
good luck and welcome aboard...