Need Help Changing Cover Faceplate Candid KX16

[Sunflwr1SWKS]

Hi!
I googled to find this forum.
I need help with changing the Cover Faceplate on a Kyocera Candid KX16
If someone knows how or If someone can tell me where to find the instructions I would appreciate the help.
Thank YOU!
Brenda
Sunflwr1SWKS

[samawi12]

how many phone kx16 do u have?

[NoLimit_05]

Originally Posted by Sunflwr1SWKS

Hi!
I googled to find this forum.
I need help with changing the Cover Faceplate on a Kyocera Candid KX16
If someone knows how or If someone can tell me where to find the instructions I would appreciate the help.
Thank YOU!
Brenda
Sunflwr1SWKS

1. Above the LCD screen, locate the little opening for the speaker. Now, look to the left and right of the speaker. You'll see two little raised circles. These are actually screw covers that pop right out!

2. Directly below the LCD screen is a label for the provider of your phone service. Turns out that this is also a screw cover! It has some adhesive, so you may have to work at it just a bit to get it off. There are 2 screws underneath.

All 4 screws require a T4 screwdriver head. I don't know how readily available that is in your local hardware store, but I know for sure that you can buy them on the Internet. Once you have the 4 screws out, you can use a thin pry tool to pop off the faceplate. Then it's just a matter of putting on the new faceplate on and putting the 4 screws back in.

Good Luck!!

[Eriisu]

Originally Posted by NoLimit_05

1. Above the LCD screen, locate the little opening for the speaker. Now, look to the left and right of the speaker. You'll see two little raised circles. These are actually screw covers that pop right out!

2. Directly below the LCD screen is a label for the provider of your phone service. Turns out that this is also a screw cover! It has some adhesive, so you may have to work at it just a bit to get it off. There are 2 screws underneath.

All 4 screws require a T4 screwdriver head. I don't know how readily available that is in your local hardware store, but I know for sure that you can buy them on the Internet. Once you have the 4 screws out, you can use a thin pry tool to pop off the faceplate. Then it's just a matter of putting on the new faceplate on and putting the 4 screws back in.

Good Luck!!

You can get the T4 screwdriver at your local Lowe's store. Just ask an employee to help you find one so you don't spend hours looking.